Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Secondary memory module
Removing the secondary memory module
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The figure indicates the location of the secondary memory module and provides a visual representation of the removal
procedure.
Steps
1. Pry the securing clips from both side of the memory module until the memory module pops up.
2. Remove the memory module from the memory-module slot.
Installing the secondary memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the secondary and provides a visual representation of the installation procedure.
34
Removing and installing components
after working inside your
before working inside your
computer.
computer.