Installing The Middle Cap - Dell P93F Service Manual

2. Remove the middle cap from the computer.

Installing the middle cap

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the middle cap and provides a visual representation of the installation procedure.
Steps
1. With the open side of the middle hinge cap facing down, push the cap into the right display hinge cap at an angle while
tucking the WWAN antennas into its hollow center.
2. Push the other side of the cap into the left display hinge cap and tuck the display cable into the middle cap hollow center.
Removing and installing components 85