Steps
Slide the SD card into the slot on the computer until it clicks into place.
Next steps
1. Follow the procedure in
Secondary M.2 solid-state drive
Removing the secondary M.2 Solid-state drive
Prerequisites
NOTE:
For computers shipped with M.2 2280 PCIe Gen4 SSD installed in slot 4.
NOTE:
This slot supports only M.2 2280 PCIe Gen4 Solid-state drive and does not support any Optane, SATA, or M.2 2230
Solid-state drive.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
NOTE:
Follow this procedure only if the computer is shipped without SSD door configuration).
About this task
The figure indicates the location of the secondary M.2 SSD and provides a visual representation of the removal procedure.
For computers with SSD door configuration
16
Removing and installing components
after working inside your
before working inside your
computer.
computer.