Recovering The Operating System - Dell P93F Service Manual

Hide thumbs Also See for P93F:
Table of Contents

Advertisement

Table 19. System-diagnostic lights (continued)
Blinking pattern
Amber
3
3
3
3
3
4
4
NOTE:
Blinking 3-3-3 LEDs on Lock LED (Caps-Lock or Nums-Lock), Power button LED (without Fingerprint reader), and
Diagnostic LED indicates failure to provide input during LCD panel test on Dell SupportAssist Pre-boot System Performance
Check diagnostics.

Recovering the operating system

When your computer is unable to boot to the operating system even after repeated attempts, it automatically starts Dell
SupportAssist OS Recovery.
Dell SupportAssist OS Recovery is a standalone tool that is preinstalled in all Dell computers installed with Windows 10 operating
system. It consists of tools to diagnose and troubleshoot issues that may occur before your computer boots to the operating
system. It enables you to diagnose hardware issues, repair your computer, back up your files, or restore your computer to its
factory state.
136
Troubleshooting
White
Problem description
2
PCI or Video card/chip failure
4
BIOS Recovery image found
5
6
Flash corruption detected by
7
Timeout waiting on ME to
reply to HECI message.
1
Memory DIMM power rail
2
CPU Power Cable connection
but invalid
Power rail failure
SBIOS.
failure
issue
Suggested resolution
If problem persists,
replace the main battery.
Replace the system board.
Flash latest BIOS version
If problem persists,
replace the system board.
Replace the system board.
Press power button for
over 25 seconds to do
RTC reset. If problem
persists, replace the
system board.
Disconnect all power
source (AC, battery, coin
cell) and drain flea power
by pressing and holding
down power button 3~5
seconds to ensure all
power are drained.
Run "BIOS recovery from
USB", and the instructions
are in the website
Dell
support.
If problem persists,
replace the system board.
Replace the system board
Reset and swap memory
modules among the slots.
If problem persists,
replace the memory
module.
Run the PSU BIST.
If problem persists,
replace the system board,
power supply or cabling.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Precision 7560P93f002

Table of Contents