Steps
1. Route the battery cable through the routing guide on the battery.
2. Connect the battery cable to the connector on the battery.
3. Adhere the plastic tape to secure the battery cable to the battery.
4. Align the tabs on the battery at an angle with the tab holes on the computer chassis.
5. Place the battery onto its slot in the computer.
6. Replace the three (M2x5) screws to secure the battery to the computer.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
30
Removing and installing components
after working inside your
computer.