Table of Contents
Advertisement
To lubricate the hook:
1. Turn the screw (1):
Important
The released amount of oil does not change until the operating time has
run a few minutes. Sew for several minutes before you check the setting
again.
6.3 Servicing the pneumatic system
6.3.1 Adjusting the operating pressure
Proper setting
Refer to the Technical Data ( p. 259) chapter for the permissible
operating pressure. The operating pressure cannot deviate by more than
± 0.5 bar.
Check the operating pressure on a daily basis.
Fig. 215: Adjusting the operating pressure
(1) - Pressure regulator
216
• release more oil: Turn screw (1) counterclockwise
• release less oil: Turn screw (1) clockwise
NOTICE
Property damage from incorrect adjustment!
Incorrect operating pressure can result in damage to the machine.
Ensure that the machine is only used when the operating pressure
is set correctly.
①
②
(2) - Pressure gage
Operating Instructions 550-D800 - 01.0 - 05/2023
Maintenance
Advertisement
Table of Contents
