Programming
5.21.5 Inserting contents
The following contents can be added to the end label:
• Standard text (New Static Text, p. 200)
• Variable text (New Variable Text, p. 201)
• 1D barcode (New Barcode 1D, p. 197)
• 2D barcode (New Barcode 2D, p. 197)
• Graphic (New Graphic, p. 202)
To insert new contents:
1. Press the desired button in the Toolbox.
2. Click the desired position on the end label at which you wish to insert
The display switches to the setting options available for the
3. Adjust the content.
4. Press OK to save.
Important
Every end label MUST have an end label barcode.
Operating Instructions 550-D800 - 01.0 - 05/2023
the content.
The marking always refers to the corner at the top left.
corresponding content.
195