Creating A Backup Of The Protocol Database (Backup Protoc. Db) - Dürkopp Adler 550-D800 Operating Instructions Manual

Programming
4. Press the Release button.
 The listed parameters are now no longer displayed semi-transparent.
5. Select the parameters you wish to restore.
6. Confirm with OK.
5.6.5 Creating a backup of the protocol database
(Backup protoc. DB)
This function is used to back up all protocol files to a protocol database
under the corresponding names of the machine.
To create a backup of the protocol database:
1. Log in with security level 2 ( p. 75).
2. To create a backup of the protocol database, proceed as explained for
the creation of a system backup ( p. 125).
Important
Since the machine produces tearing seams that are essential to safety, it
is imperative that you create regular backups of the protocol database and
store them long term in an external storage location.
Information
The name of the machine can be changed on the Setup display
( p. 133).
You can change the storage location as needed ( p. 175).
128 Operating Instructions 550-D800 - 01.0 - 05/2023