Table of Contents
Advertisement
Programming
To open the bobbin database:
1. Log in with security level 2 ( p. 75).
2. Open the Checks display ( p. 125).
3. Press the Bobbins button.
The display switches to:
Fig. 134: Opening the bobbin database (Bobbins)
5.6.16 Needle database (Needle DB)
If the Setup display shows the Needle control function as activated,
the user will be prompted at specific intervals to check and, if necessary,
change the needle.
This check and any necessary change will be documented in the needle
database.
Information
If the function Needle control is deactivated on the Setup display,
the Needle DB button will be displayed semi-transparent. It will then not
be possible to open the needle database.
142
Operating Instructions 550-D800 - 01.0 - 05/2023
Advertisement
Table of Contents
