Maintenance
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Fig. 59: Lubricating the hook
(1) - Screw
To lubricate the hook:
1.
Turn the screw (1):
• counterclockwise: more oil is released
• clockwise: less oil is released
Important
The released amount of oil does not change until the operating
time has run a few minutes. Sew for several minutes before you
check the setting again.
6.3
Servicing the pneumatic system
6.3.1
Adjusting the operating pressure
NOTICE
Property damage from incorrect adjustment!
Incorrect operating pressure can result in damage to
the machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
①
135