Lubricating - Dürkopp Adler 550-D800 Operating Instructions Manual

Maintenance
Areas particularly susceptible to soiling:
• Knife on the winder (4)
• Area under the throat plate (3)
• Hook (2)
• Area around the needle (1)
To clean the machine:
1. Switch off the machine.
2. Remove any sewing dust and thread residues using a compressed
Important
If you wish to clean the machine with cleaning agents, do not use just
any cleaner. To prevent damage to the surfaces, use the cleaner
MONOCLEAN X400.
Follow the instructions on how to use this cleaning agent to prevent
damage to the machine.
Information
If the degree of pollution of the SSD is above 80%, an error message ap-
pears on the control panel. Then clean the area on the hook and sensors
on the sensor block with a cloth.

6.2 Lubricating

Operating Instructions 550-D800 - 01.0 - 05/2023
air gun or a brush.
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
NOTICE
Property damage from incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
213