Table of Contents
Advertisement
Programming
Information
You do not have to complete all text fields.
5.13.3 Positioning the text on the end label
The positions of the individual contents on the end label are based on
the coordinate axes X (width) and Y (height).
This information is specified in mm.
Fig. 156: Defining the text positions
To position the text on the end label:
1. Log in with security level 2 ( p. 75).
2. Open the End label display ( p. 164).
3. Press the Pos. text1 X input field.
An input window opens.
4. Enter the desired value.
5. Confirm with
6. Press the Pos. text1 Y input field.
An input window opens.
7. Enter the desired value.
8. Confirm with
9. To position the texts 2, 3 and left/right, repeat steps 4-9.
Operating Instructions 550-D800 - 01.0 - 05/2023
.
.
165
Advertisement
Table of Contents
