Field Service Ver. 1.0 Aug. 2007
[1]
[2]
[2]
[1]
[2]
4139F2C591DA
[1]
4139F2C673DA
[1]
[3]
4139F2C588DA
7. Disconnect two flat cables [1] and
the connector [2] from the image pro-
cessing board.
8. Remove three wire saddle [1].
9. Disconnect two connectors (MPJ1
and MPJ4) [2] from the image pro-
cessing board.
10. Open the IR unit.
11. Remove two screws [1], IR unit left
cover [2], and IR unit right cover [3].
NOTE
• To unhook the tab, insert your fin-
ger into the hole below the hinge
and try to push the cover outward.
5. Other
51