11. UTILITY mode
B. INTERVAL
Function
• To specify the length of time until the cursor continuously moves between settings or
characters.
Use
• The default setting is 0.1sec.
Setting/
"0.1sec"
procedure
2.5sec
11.2.6
LANGUAGE
Function
• Sets the language of the control panel display.
Use
• To change the language of the control panel display.
• The default setting is ENGLISH.
"ENGLISH"
Setting/
SPANISH
procedure
SLOVAK
NOTE
• The default setting of language is subject to the setting of [PTT SETTING].
11.2.7
LAMP OFF TIME
Function
• Sets the timing at which the scanner unit lamp turns OFF.
• MODE1: When the machine enters preheat mode
Use
• MODE2: When the machine enters energy save mode
• The default setting is MODE1.
Setting/
procedure
11.2.8
LAMP WARMUP TIME
Function
• Sets the warm-up time for the lamp of the scanner unit.
• If [FIX] is selected, the scanner unit can be used after the printer engine preparations
are finished.
Use
• If [AUTO] is selected, the scanner unit cannot be used until the printer engine prepara-
tions are finished.
• The default setting is FIX.
Setting/
procedure
11.2.9
BUZZER VOLUME
Function
• To set the volume of alarms and the beep sounded when a key is pressed.
Use
• The default setting is LOW.
Setting/
procedure
OFF
132
0.3sec
0.5sec
3.0sec
FRENCH
PORTUGUESE
HUNGARIAN
"MODE1"
AUTO
"LOW"
Field Service Ver. 1.0 Sep. 2008
1.0sec
1.5sec
GERMAN
ITALIAN
RUSSIAN
CZECH
POLISH
MODE2
"FIX"
HIGH
2.0sec