Toner Empty Report; Protocol Report; Gdi Timeout; Energy Save Mode - Konica Minolta magicolor 2590MF Service Manual

Field Service Ver. 1.0 Aug. 2007
11.3.10

TONER EMPTY REPORT

Function
• Select to generate a report to a specific destination when toner empty status occurs in
the engine.
Use
• The default setting is OFF.
ON:
"OFF": Not to generate report.
• If "ON" is selected, select generate report and send to remote side when toner runs out.
Setting/
• Enter the telephone number for which the report is to be produced.
procedure
• Fax number specifications: An up-to-20-digit number that may consist of [0-9], [*], [#],
[pause], and [space]. (0-9, #, *, pause, _)
• The report will generate after 20 minutes, 24 hours, 48 hours, or 72 hours after the event
has occurred or until the condition is gone.
A. Toner empty report (example)
NAME:ABC 123
TEL:1234567
DATE: Jul 01.2006 15:12
The Fax's following conditions were appears, the machine may be can not work correctly, the Fax already send a
report to your dealer automatically. They will contact with you soon.
Toner status
11.3.11

PROTOCOL REPORT

Function
• Print communication report.
• Choose one from among the following.
Use
• The default setting is OFF.
Setting/
"OFF":
procedure
ON:
ON (ERROR): Print T.30 communication report when an error occurs.
11.3.12

GDI TIMEOUT

Function
• To specify the time for GDI time out.
Use
• The default setting is 6 (60 seconds).
Setting/
0 (5sec)
procedure
4 (40sec)
11.3.13

ENERGY SAVE MODE

Function
• Set weather to activate Energy Save mode when print job receiving or panel operation
have not been made for a given period.
Use
• The default setting is ON.
Setting/
procedure
"ON"
Generate a report to report destination.
SERVICE REPORT
: Empty
Disable T.30 communication report.
Print T.30 communication report.
1 (10sec) 2 (20sec)
5 (50sec) "6" (60sec)
OFF
11. SERVICE MODE
4139F3C545DA
3 (30sec)
125