Burner Broil - Samsung NX60T8111S Service Manual

3. Disassembly and Reassembly

3-25 Burner Broil

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
range. Replace all panels before operating range. Failure to do so can result in death or personal injury from
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
This document can not be used without Samsung's authorization.
HEATER CONNECTOR
BRACKET HSI-WIRE
SHIELD CAVITY UPPER
1. Follow the step A .
2. Disconnect the wires or the connector of
the HSI. (Identify and mark the two wires
going to HSI.)
3. Remove 1 screw of bracket HSI-wire and
separate the bracket HSI-wire.
4. Remove 4 screws of Shield cavity.
5. Support the burner-broil with one hand,
remove 2 screw supporting the burner-
broil to the front and the rear of the oven.
6. Pull the upper Assy-burner broil spreader
to disconnect it from the holder nozzle-
broil on the rear wall of the oven.
7. Carefully remove Assy-burner broil
spreader.
48