Step D) - Oven Door - Samsung NX60T8111S Service Manual

3. Disassembly and Reassembly
3-4 (Step D) – Oven Door
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
The door is very heavy. Be careful when removing door. Do not lift door by the door handle.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
This document can not be used without Samsung's authorization.
1. Fully open the door.
2. Pull the hinge locks downward (use pliers)
3. Firmly grasp both side of the door at the
top.
4. Close door to the door removal position,
which is approximately 5 degrees. Lift
door up and out until the hinge arm are
clear of the slot.
1. Firmly grasp both sides of the door at the
top position and insert hinges into slots
2. Fully open the door.
(If the door will not fully open, it means
that the indentation is not seated correctly
in the bottom edge of the slot. Push the
hinge locks up to the locked position.)
3. Close the oven door.
21