Burner Bake - Samsung NX60T8111S Service Manual

3. Disassembly and Reassembly

3-27 Burner Bake

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
range. Replace all panels before operating range. Failure to do so can result in death or personal injury from
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
CAVITY FLOOR
This document can not be used without Samsung's authorization.
HIS CONNECTOR
BRACKET SHIELD
+ BKT SPREADER
Burner Bake
HSI
(Hot Surface Igniter)
1. Turn off the electrical supply going to the
range.
2. Shut off the gas shut-off valve in the gas
supply line to the range.
3. Open the oven door and remove the racks
from inside the oven.
4. Pull on the wires or the connector until the
wire connector appears from the back wall
of the warming drawer opening.
5. Disconnect the connector of HSI of the
burner bake.
6. Remove 2 screws from the back of the
7. Remove 2 screws from the front of the
bracket bake-spreader.
8. Lift front the bracket bake-spreader and
lift out the bracket-bake spreader.
9. Remove 1 screws from bracket broil sub
and lift up the bracket broil sub .
10. Remove 2 screws from the Burner Bake
and lift up the burner bake from the
holder-bake burner on the bottom of the
drawer .
50