Samsung NX60T8111S Service Manual page 35

3. Disassembly and Reassembly
This document can not be used without Samsung's authorization.
Switch Ignition
Adaptor
1. Follow the Step B and C,F.
switch ignition and pull it straight out to
release it from the control shaft.
3. Using a tubing wrench and a channel lock
wrench, disconnect the gas lines from
the valve cooktop. Do not bend or crimp
gas lines during Removal(When you
disconnect gas line work under the valve).
4. Remove the Valve Cooktop followed by
removal of 3 screw on the valve cooktop.
5. Replace the Valve Cooktop and Check gas
leakage.
• When assembling or disassembling
the valve, the screw torque should be
adjusted to 1.5N.m.
4
4
4
35