Switch-Door Plunger - Samsung NX60T8111S Service Manual

3. Disassembly and Reassembly
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
range. Replace all panels before operating range. Failure to do so can result in death or personal injury from
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
This document can not be used without Samsung's authorization.
Switch Door Plunger
1. Turn off the electrical supply going to the
range.
2. Shut off the gas shut-off valve in the gas
supply line to the range.
3. Open the oven door.
4. Carefully pull out the switch door plunger
switch from the upper left corner of the
cavity front. Gently grasp the plunger with
pliers and work from side to side while
pulling. Pull out far enough to expose the
wires.
5. Note the location and mark the wires;
then disconnect the wire to the switch
door plunger.
6. Replace with the switch-door plunger,
reconnect the wires in their original
positions, and reinstall switch in the oven
frame.
40