Samsung NX60T8111S Service Manual page 66

4. Troubleshooting
Error Trouble Shooting
SYMPTOM
*
Oven temperature
*
rises too slowly.
*
*
*
*
Oven temperature
rises too fast.
*
This document can not be used without Samsung's authorization.
DIAGNOSIS
Make sure the harness connections at the
PCB terminals (T02, T03) have not come
loose or disconnected.
( Bake : TB205, BROIL : TB204,
DLB : TB200,TB201 )
Make sure the broil and bake burners
have been adjusted properly.
Make
sized properly for the type of gas being
used.
Make sure that the bake, broil, and source
control relays on the PCB are working
normally.
The oven temperature exceeds
room temperature operation.
Make sure the harness is wired correctly
and does not have a short circuit in it.
Make
sized properly for the type of gas being
used.
* Repair or replace the harness.
* Open or close the air shutter at the base of the
* Replace
Burner
Broil
Bake
* Repair or replace the faulty relay.
* Make sure all harness connections are properly
connected.
* Replace the PCB.
* Repair or replace the faulty broil or bake relay.
* Repair or replace the harness.
* Replace
Burner
Broil
Bake
66
REMEDY
.
:
NG LP
mm mm
1.80 1.02
1.90 1.15
:
NG LP
mm mm
1.80 1.02
1.90 1.15