Control Panel - Gas Cooktop - Samsung NX60T8111S Service Manual

This document can not be used without Samsung's authorization.
LIGHTING A GAS SURFACE BURNER
Make sure all surface burners are positioned and assembled properly.
1. Push in and turn the control knob to the LITE position. You will hear a
"clicking" sound indicating the electronic ignition system is working properly.
2. After the surface burner lights, turn the control knob to adjust the power
setting of the surface burner and turn off the electronic ignition system.
If the control knob is left in the Lite position, the electronic ignition system
will continue to click and spark. It is not recommended to operate any
surface burner in the Lite position, since all electronic igniters spark at the
same time.
GAS SURFACE BURNERS AND CONTROL KNOBS
Your
easy assembly and accurate and dependable operation.
desired cooking job.
The
and foods that require low heat for long cooking times. The 5,000 BTU burner
The
can be used for most cooking.
cooking temperatures to meet your cooking needs.
The
burners,
to large cookware. The 17,000 BTU burner spreads out the heat with a larger
This
[30.5 cm]) or larger pots and pans.
the proper heat source for the
simmer setting.
11
2
1
5,000
9,500
BTU
BTU
10,000
BTU
16,000 17,000
BTU
BTU