Replacing The Hot Surface Ignitor (Hsi) Of The Burner Broil, Nozzle Broil-Burner, And Holder Broil-Burner - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly
3-17 Replacing the HOT SURFACE IGNITOR (HSI) of the BURNER BROIL,
NOZZLE Broil-Burner, and HOLDER Broil-BURNER
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Hot Surface
Ignitor (HSI)
Remove the gas nozzle
Nozzle Broil-
Burner
Holder Broil-
Burner
1. To replace the HSI of the burner broil,
Remove 2 screws assembled to HSI
1. To replace the nozzle broil-burner,
Remove the gas nozzle with a 9/32-inch
socket wrench.
1. To remove the holder-broil burner,
Remove 2 screws supporting the holder-
broil burner to the rear of the oven.
2. When the service is complete, reverse
the order to install burner broil, HSI,
Nozzle and Holder broil burner.
NOTE: The
screw and opening or closing the
air shutter at the base of the oven
burner.
30