Table of Contents
Advertisement
3. Disassembly and Reassembly
3-21 SENSOR-THERMISTER
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
range. Replace all panels before operating range. Failure to do so can result in death or personal injury from
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
SCREW-TAPPING
This document can not be used without Samsung's authorization.
UPPER-SENSOR THERMOSTER
CONNECTOR
1.
Follow the Step A.
2.
Open the oven door and remove the racks
from inside the oven.
3.
Disconnect connector of the sensor
thermistor to the rear of the range.
4.
The oven sensor thermistor is in the upper
right-hand corner of the oven cavity.
Remove 2 screws and carefully pull the
sensor wire leads until the wire connectors
appear.
5.
Reverse the order to install the oven
temperature sensor.
• If you can't access the wire connectors
from inside the oven, remove the rear
cover panel. Mark and disconnect the
two wires going to the oven sensor
thermistor.
42
Hide quick links:
Advertisement
Table of Contents
