Samsung NX60T8111S Service Manual page 83

4. Troubleshooting
Oven parts
Oven lamp not working
Oven lamp is
not working.
* Make sure the control lockout feature
is not turned on.
Ok
* Check for burned out bulb.
Ok
* Check the harness and connections
at connectors (CN205 &CN300)
on the PCB. light socket terminals,
and oven lamp and source control
relays(RY208)
Ok
* Measure the resistance across the
light ballast/socket terminals.
Ok
* Replace the PCB.
This document can not be used without Samsung's authorization.
No
No
No
No
END
* While holding the oven door open,
press and hold the lockout keypad for
three or more seconds.
* Remove oven lamp cover
out, replace with a 40W appliance
bulb.
* Reconnect securely or replace
damaged wire harness.
END
* Replace the oven light
ballast/socket.
END
Oven light socket
terminal
83
END
END