Gasket Door - Samsung NX60T8111S Service Manual

3. Disassembly and Reassembly

3-22 Gasket Door

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result
in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
range. Replace all panels before operating range. Failure to do so can result in death or personal injury from
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
This document can not be used without Samsung's authorization.
1. Open the oven door to its fully down
position.
2. Pull the ends of the gasket out of the liner
holes.
3. Pull the oven door gasket clips out of the
holes until all of the clips are removed.
4. When the service is complete, Insert
gasket clips in each mounting hole. Push
the ends of gasket in end holes in the
bottom of the front oven frame.
5. Close the oven door.
• When you install the new gasket, make
sure that all of the clips are seated in
their liner holes, and that the ends of
the gasket are pushed fully into their
holes. Use the pointed end of a pencil
to push the gasket ends into the holes.
43