Henny Penny FlexFusion FSEN610 Operating Manual page 35

Basic setting Parameter
s
Lockscreen
Lockscreen 662
Password 7
Cooking modes
Preselected steaming 9
temperature
Preset 10
combisteaming
temperature
Preselect hot air 11
temperature
Preset regeneration 12
temperature
Ready2Cook
Ready2Cook Active 607
Preheating 4
temperature
Ready2Cook
Cooking
SES: Use at the end 624
of the cooking
program
Query: Restart after 697
cooking program is
interrupted
Apply changes after 696
the end of the
cooking program
MagicHood
Time extension for air 5
recirculation hood
Basic setting parameters
The unit is delivered with presets. The values in the following list can
be modified in the parameter level.
Standard Range of
value adjustment
0 0 = Deactivated
1 = Activated
111 0 — 300
100 30 °C (86 °F) —
130 °C (266 °F)
150 30 °C (86 °F) —
250 °C (482 °F)
180 30 °C (86 °F) 250
°C (482 °F)—
130 30 °C (86 °F) —
180 °C (356 °F)
1 0 = not activated
1 = Activated
15 0 — 30%
1 0 = Deactivated
1 = Activated
0 0 = No query
1 = Query only
with AutoChef
2 = Query always
activated
0 0 = Do not apply
1 = Apply
60 0 — 600 s
Operating instructions
Operating the unit
Explanation
Activate or deactivate screen locking.
Screen locking is activated after a certain
period of time if entries are no longer made
on the touchscreen.
The password for the basic settings can be
changed in this range.
Preset temperature for steaming
Preset temperature for combisteaming
Preset the temperature for hot air
Preset temperature for regeneration
Indicates whether or not the presetting is
activated.
When loaded a full charge of large masses
(roasts, loaf of bread), increase the
preheat temperature so that the oven
temperature does not drop too suddenly.
Presetting for Steam Exhaust System
when creating a new cooking program
Setting for the behavior after an
interruption of the cooking program
Automatic saving of changes made (save
at the end of a cooking program).
Condensation hood after-running time after
opening the cooking chamber door
35