Henny Penny FlexFusion FSEN610 Operating Manual page 48

Operating the unit
Prerequisite RackControl2 is started
48
6. Select the desired shelf.
7. Configure and confirm the desired settings (See "Setting the
cooking time" and "Setting the core temperature").
RackControl2 is set for the selected shelf.
8. Configure settings for additional shelves as necessary.
9. Tap the "Start" button in the information strip.
The display changes to the "Actual value" display.
The unit heats up.
The "Start" button is replaced with the "Stopp" button.
RackControl2 is started.
RackControlEnding 2
b
Image: End RackControl2 early window
a Stop button
Preheat temperature not reached
1. Tap the RackControl2 window.
The last Setting window is displayed.
2. Swipe upwards to open the next page.
3. Tap the Continue field.
Heating is interrupted.
RackControl2 starts at the current temperature.
Operating instructions
b Setting window
a