Fastening The Unit To The Floor; Securing The Unit To Prevent Tipping - Henny Penny FlexFusion FSEN605 Installation Manual

Installing the unit
Prerequisite Pins installed in the uprights of the base frame

5.3 Fastening the unit to the floor

5.3.1 Securing the unit to prevent tipping

WARNING
20
A
a
Image: A Stop profile, B Hang-in frame
a Stop profile
b Bolt
1. Place the stop profiles on the pins (at the back).
2. Install the support racks.
Risk of accident from insufficient fastening
Unit can tip over
• Depending on the unit type, suitable measures must be taken to fasten the
unit to the floor.
• Comply with the requirements for the condition of the floor.
• Comply with the requirements for the means of fastening.
• Follow the manufacturer's instructions for using the means of fastening.
Depending on the size, it is essential that certain combisteamer types
or combisteamers used in combination with a Stapelkit (stacking kit), a
recirculation hood, an underframe or base cabinet be secured to
prevent tipping.
Unit types that must be secured to prevent tipping (see "Unit and
connection data").
Installation instructions
B
b
c
c Hang-in frame
c