Bajaj Discover 100M Service Station Manual page 24

GENERAL INFORMATION
Lubrication
It is most important to lubricate rotating or sliding parts during
assembly to minimize wear during initial operation. Apply the specific oil
or grease as specified.
Direction of Engine Rotation
When rotating the crankshaft by hand, the free play amount of
rotating direction will affect the adjustment. Rotate the crankshaft to
positive direction (clockwise viewed from clutch cover side).
Electrical Wires
A two-colour wire is identified first by the primary colour and then
the stripe colour. Unless instructed otherwise, electrical wires must be
connected to those of the same colour.
Instrument
Use a meter that has enough accuracy for an accurate
measurement. Read the manufacturer's instructions throughly before
using the meter. Incorrect values may lead to improper adjustments.
Discover 100 M
Service Station Manual
12
Dealer Development Center
Akurdi Pune