CUSTOMER INFORMATION
Non-Use Maintenance
Non-use maintenance is necessary if a vehicle remains off road for a longer duration (more than 15 days**). The correct
and careful non-use maintenance carried out before storing the vehicle will prevent the vehicle from rusting and from
such other non-operational damages like fire hazards.
•
Clean the entire vehicle thoroughly.
•
Empty the fuel from the fuel tank and carburettor float bowl (if fuel is left in for a longer time, the fuel will break and
gummy substance could clog the carburettor).
•
Remove the spark plug and put several drops of 2T oil into the cylinder. Self start the engine a few times to coat the
cylinder wall with oil and install back the spark plug.
•
Set the vehicle on a box or a stand so that both the wheels are raised off the ground.
•
Spray oil on all unpainted metal surfaces to prevent rusting. Avoid getting oil on rubber parts or brake liners.
•
Lubricate the control cables.
•
Cover the entire vehicle neatly. Ensure that the storage area is well ventilated & free from any source of flames or
spark.
•
Fill 10% excess air pressure in both wheels.
** For Battery:
a.
Remove battery and keep it on wooden plank, in properly ventilated area.
b.
Before taking the vehicle for use.
•
Get the battery recharged from the Authorised Service Center / Battery Dealer.
•
Apply petroleum jelly on terminals.
Preparation for regular use after storage :
•
Clean the vehicle
•
Make sure the spark plugs are tightly fitted.
•
Fill the fuel tank with fuel.
•
Change the engine oil.
•
Check all the points listed in the Daily Safety Checks section.
•
Check and inflate tyres to the proper tyre pressure.
Discover 100 M
Service Station Manual
18
Dealer Development Center
Akurdi Pune