SOP OF ENGINE DISMANTLING
Crankshaft Removal & fitment
Discover DTS-Si
Service Station Manual
• Remove the engine from vehicle.
• Remove cylinder head cover & cylinder head assembly.
• Remove block & piston assembly.
• Spit the crankcase & remove
crankshaft assembly.
• Before re-fitment of crankshaft assembly,
with heater at 150 C
0
Note :
Ensure crankshaft fitment in crankcase by hand pressure only.
Mallet can be used for tapping crankshaft.
Do not use hammer for crankshaft fitment
122
heat the clutch side crankcase
then fit the crankshaft assembly.
Dealer Development Center
Akurdi Pune