Nautilus Schwinn 800IC Service Manual page 69

15. Being prepared to support the Seat Post Assembly, loosen the Seat
Post Adjustment Knob and remove the Seat Post Assembly from the
Frame Assembly. Set the Seat Post Assembly safely aside away from the
work area.
16. Remove the Seat Post Adjustment Knob from the Frame Assembly.
17. On the left side of the Seat Post, there is a small opening (indicated
by oval) where the Seat Post Bushing Tab is secured. Place the end of
a small standard screwdriver into the opening, and push the tab in while
pivoting upward the Bushing.
18. With the Seat Post Bushing released, place the end of the
screwdriver under the lip of the Bushing. Pivot upward until the Handlebar
Post Bushing is released. Continue pushing upward to remove the
Bushing.
Seat Post
Adjustment Knob
Seat Post Bushing
Seat Post
69
Seat Post Assembly
Securing Tab
Seat Post Bushing