Nautilus Schwinn 800IC Service Manual page 42

24. Add Loctite 272 (or equivalent) to the inner threads of the Crank
®
Nut. Do not to apply the Loctite
25. Install the Crank Nut onto the Crank Shaft, and fully tighten it.
26. Replace the threaded Cap onto the Crank Arm.
27. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
272 to the Crank Shaft.
®
Crank Nut
42
Crank Nut