Table of Contents
Advertisement
2. FSN-1004 Orientation
Card Descriptions
4)
Table 2-3. SOC connector combinations for selected universal output formats
3G-SDI
HD-SDI
SD-SDI
DVI *
CVBS
Y/C
YPbPr **
RGsB
RGBS
RGBHV ***
5)
Note that test patterns can be assigned to any SOC output, and a raster box can be turned
on or off. In Chapter 4, see the
44
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
"Card
LEDs" section on page 47 for details.
Universal Output 1
Three connectors are provided for Universal Output 1:
~
1 x HD15
~
1 x DVI-I
~
1 x BNC
Using these connectors, different combinations of outputs can be connected to
the FSN-1004, as outlined below.
Note
Multiple outputs on a single SOC channel can be active at the
same time, provided that the selected format is compatible.
For example, 1920 x 1080i @ 59.94 is a compatible format on
all three output connectors.
Cells with check marks denote the connections required for the indicated format.
Format
BNC
* up to 165 MHz
** NTSC, PAL or HD
*** up to 165 MHz (UXGA)
Refer to the
"Analog Format Connection
additional information on using the HD-15 connector.
Universal Output 2
Output connections for Universal Output 2 are identical to Universal Output 1.
Refer to the explanation of Universal Output 1 for details.
"Output Test Patterns
Connectors
DVI-I
HD-15
Table" section on page 48 for
Menu" section for details.
FSN-1004 • User's Guide • Rev 00
Advertisement
Table of Contents
