Barco FSN-1004 User Manual page 192

6. Operations
Working with Memory Registers
oÉÅ~ääáåÖ=jÉãçêó=oÉÖáëíÉêë
When you recall a memory register, you are recalling all (or part) of the stored register's
contents back to the switcher.
Recalling a memory register and bypassing the Enables is an easy equation. This method
recalls the entire contents of the selected module(s).
•
Recalling a memory register and adjusting Enables is also an easy equation. This method
recalls partial contents of the selected module(s).
•
The following topics are discussed in this section:
•
•
•
oÉÅ~ääI=_óé~ëë=bå~ÄäÉë

Use the following steps to recall a memory register and bypass Enables:
1.
2.
3.
oÉÅ~ääI=^Çàìëí=bå~ÄäÉë

Use the following steps to recall a memory register and adjust the Enables:
1.
2.
3.
4.
5.
6.
7.
192
RECALL , [select register #] , ENTER
RECALL , [select modules] , [adjust Enables] , ENTER
Recall, Bypass Enables
Recall, Adjust Enables
Memory Recall Notes
In the GUI , go to the Memory page and select RECALL
Select the desired register number.
Press ENTER . The entire memory register is now recalled to the panel.
In the GUI , go to the Memory page and select RECALL
Select the desired register number.
Navigate to the {Enables} Menu . The selected register will be highlighted in the
table, and the " RECALL " banner will be lit red.
On the modules row, press the light blue button for the first module in which you
want to adjust Enables.
~
Note that only the "stored" modules will be blue. All other modules will
be grayed out.
~
In the "Enables" box, note that the enables will appear exactly as stored.
All those that were not enabled will be grayed out.
Toggle the desired Enables on or off, as required. Remember that you can also
use the {All On} and {All Off} functions.
Repeat steps 5 and 6 for all remaining modules in which you want to adjust
Enables.
Press ENTER on the Keypad . The register is now recalled, using the adjusted
Enables.
FSN-1004 • User's Guide • Rev 00