Barco FSN-1004 User Manual page 143

lìíéìí=mêçÅÉëëáåÖ=pÉÅíáçå

The figure below illustrates the Output Processing Section :
Processing
Sharp-
ness
Figure 4-70. Output Processing Section, Output and Process Panel
•
Sharp-
ness
•
Flicker
Filter
•
De-
Interlace
Adaptve
lìíéìí=pí~íìë=pÉÅíáçå

The figure below illustrates the Output Status Section on the Output and Process Panel :
Output 2 status
Figure 4-71. Output Status Section, Output and Process Panel (sample)
This section mirrors the selected SOC connector on the Rear I/O View — either output 1 or
output 2 will be listed. Connectors that are not outputting video will be grayed out.
FSN-1004 • User's Guide • Rev 00
De-
Flicker
Interlace
Filter
Adaptve
Press {Sharpness} to display the Sharpness value button. Use the button to set
the Aux output's sharpness.
For interlaced Aux outputs only, press {Flicker Filter} to display the Flicker Filter
value button. Use the button to adjust the filter.
For interlaced Aux outputs only, press {De-Interlace} to display the De-Interlace
Pop-up . This function enables you to set how the system processes the Aux
output. The following options are available:
~
Select Motion Adaptive to use motion adaptive de-interlacing. In this
mode, the {Motion Threshold} button appears. See below for details.
~
Select Field to Frame to use field-to-frame de-interlacing. This mode
avoids motion artifacts by converting fields to progressive output frames.
4. Menu Orientation
Motion
Thres-
hold
System Menu
143