Table of Contents
Advertisement
7. Multiviewer Operations
Multiviewer Menu Orientation
•
•
•
The following functions are provided in the Tool Bar :
To set up the Multiviewer's output, press {Output Setup} to display the Multiviewer
Output Setup Menu . This menu sets the resolution for both MVR outputs. Refer to the
Output
"
Multiviewer Output Setup Menu
Setup
To select a single or dual Multiviewer layout from the library of pre-configured layouts, press
{Select Layout} to display the Select Layout Menu . Refer to the "
Select
section on page 204 for details.
Layout
To set colors for the Multiviewer's background, PIP borders, clock and four UMD color
selections, press {Select Colors} to display the Select Colors Menu . Refer to the "
Select
Colors Menu
Colors
To set up the Multiviewer's clock, press {Clock Setup} to display the Clock Setup Menu .
Refer to the "
Clock
on the User Preferences Menu .
Setup
To turn a PIP on or off in the selected layout, highlight the row that corresponds to the
desired PIP, then press {Mode} . In the pop-up, select On or Off . When a PIP is off, its
Mode
source, color, and UMD text assignments remain unchanged.
ON
To assign a source to a PIP, highlight the row that corresponds to the desired PIP, then
press {Assign Source} to display the Assign Source Keypad . Refer to the "
Assign
Source Keypad
Source
To change UMD text, highlight the row that corresponds to the desired PIP, then press
{UMD Text} to display the Pop-up Keyboard . Enter the desired text, up to eight
UMD
characters in length. In Chapter 4, refer to the "
Text
page 85 for details on keyboard operations.
To change UMD color, highlight the row that corresponds to the desired PIP, then press
UMD
{UMD Color} . In the pop-up menu, select one of the four available UMD colors. Note that
Color
the color of each button reflects the colors selected on the Select Colors Menu . Refer to
UMD 1
the "
Select Colors Menu
202
UMD Text — Indicates the current text string shown in the corresponding UMD.
Use the {UMD Text} button to change the text (maximum eight characters).
Color — Indicates the specific color assigned to the selected PIP's UMD. Four
color selections are available, as configured on the Select Colors Menu . Use the
{UMD Color} button to change the assigned color.
Clock — If a clock is available in the layout, a special " Clock " row appears at the
bottom of the table. Highlighting this row enables you to turn the clock on and off.
" section on page 203 for details.
" section on page 208 for details.
Clock Setup Menu
" section on page 209 for details. Note that the time is set
" section on page 212 for details.
" section on page 208 for details.
Note
UMD colors can be used to "group" sources. For example, if
you want to visually distinguish your cameras from other
Multiviewer sources, create and assign a custom UMD color.
Select Layout Menu
Using the Pop-up Keyboard
FSN-1004 • User's Guide • Rev 00
"
Select
Assign
" section on
Advertisement
Table of Contents
