Barco FSN-1004 User Manual page 121

fåéìí=jÉåì=cìåÅíáçåë
The following functions are available in the Tool Bar :
•
Input
Name
Figure 4-51. System Menu, Input Name Keyboard (sample)
•
Freeze
Off
•
Error
Reporting
On
FSN-1004 • User's Guide • Rev 00
Press {Input Name} to associate a four-character name with the selected input.
When pressed, the following pop-up Keyboard appears:
Enter the desired name and press {Enter} on the Keyboard . On the panel, the
name appears on the display above the selected input. In the table, the name
appears in the " Name " column.
See the " Using the Pop-up Keyboard
the keyboard, and the " Default Naming Conventions
details about default input names.
Press {Freeze} to toggle the freeze "state" of the selected input.
~
Select On to freeze the input.
~
Select Off to un-freeze the input.
Use the {Error Reporting} button to toggle error reporting on or off on a
connector by connector basis.
~
When on , if an input experiences an error, the associated BNC turns red
on the rear I/O view. In addition, the input's Programmable Display
turns red, and the " Error " button appears.
~
When off , the input's Programmable Display remains green, the red
" Error " button does not appear, and the error message is removed from
the list in the View Errors Menu . The connector, however, remains red.
Note You can also use this button to turn error reporting off, after
an error has occurred and you have acknowledged it.
4. Menu Orientation
" section on page 85 for more details about
" section on page 122 for
System Menu
121