Align Combi Steamer - Henny Penny FlexFusion FPG-221 Additional Installation, Operation And Maintenance Instructions

8.2.1 Align Combi Steamer

a Tray trolley
b Distance
1. Level the unit by either screwing the unit legs in or out.
2. Open the cooking chamber door.
3. Place the tray trolley against the guide rails.
4. Screw the unit legs in or out until the ball bearings (e) are the same distance as (b)
which should be 1mm - 5mm above the guide rail (c)
5. Push tray trolley back into place.
6. Level the guide rails.
7. Insert tray trolley into the unit until it is in place, then check the alignment.
The support rollers of the inserted tray trolley should no longer have floor contact.
8. Remove the handlebar (f).
9. Close the cooking chamber door.
e
d
c
Image: Aligning tray trolley with insertion system
c Guide rail
Maintenance instructions
b
a
d Unit leg
e Ball bearing
f Handlebar
Performing maintenance
f
25