Table of Contents
Advertisement
The period of time before the next item is displayed, is
shown by an indicator ring A or an indicator bar B.
Each menu is iterated a set number of times. This number
is set by your provider. If no selection is made when the set
number of iterations is reached, the system enters an idle
state, displayed by the overlay above.
1637425-I
Fig. 5-56
Fig. 5-57
The system can enter the idle state from either the profile
menu or the function card menu. To exit the idle state,
you must provide a select demand. When exiting the
idle state, the system returns to the profile or function
menu depending on the Navigation entry setting. For
more information about the Navigation entry, refer to 5.5.5
Navigation Entry Points in Menu Scan, page 43.
Operation in List View
For menu scan in list view, menu items are displayed in one
of two lists: profiles or functions. When viewing either list,
the system navigates automatically through the menu items,
moving from top to bottom, highlighting one menu item at a
time for a short duration. The duration between highlighting
menu items is set by the provider.
Whenever a menu item is highlighted, you can choose to
select or ignore it. If ignored, the next menu item below is
highlighted after a short duration. To move from the profile
list to the function list, you must select a highlighted profile.
Fig. 5-58
Usage
41
Advertisement
Table of Contents
