Invacare LiNX DLX-REM500 User Manual page 13

Table of Contents

Advertisement

Speedometer displays standstill.
While driving, the speedometer displays the
wheelchair's current speed.
The odometer displays the distance travelled
by the wheelchair since it was last reset to
zero or rolled over to zero.
The odometer can display up to a maximum
distance of 9999 km or miles, after which
it rolls over to zero.
At any time the odometer can be reset back
to zero, see 5.2.5 Configuring Odometer,
page 29.
The function information displays either the latched driving
mode, see 5.8 Latched driving mode, page 48 or the Gyro
indication, see table below.
no symbol
No Gyro is connected to the system or
enabled for drive function.
Gyro disabled.
Gyro enabled.
1637425-I
Seating Card
Seating cards are for operating the seating functions, see
5.18.1 Through Seating Cards, page 65.
Connectivity Card
Fig. 3-7 Mouse Mover function
Connectivity cards allow you to communicate with external
devices. The connectivity functions that are supported by
Fig. 3-6
Fig. 3-8 Switch Control function
Components
13

Advertisement

Table of Contents
loading

Table of Contents