Table of Contents
Advertisement
Invacare® LiNX
3.2.2 Status Bar
A Profile name
B Time
C Status information
Profile Name
The profile name can only be set by the provider.
Time
The time is displayed as a 12– or 24–hour clock. It is set
using the coordinated universal time (UTC) and an offset
based on the location (country) of the user. The UTC is
automatically acquired when a system is connected to a
10
Battery bar displays green
when state of charge is
between 60 and 100%.
Battery bar displays orange
when state of charge is
between 20 and 59%.
Battery bar displays red
when state of charge is less
than 20%.
Charging.
Fig. 3-1
programming and diagnostic tool. The country-based offset
is set through the remote module's Menu screen. See 5.2.4
Configuring Settings, page 27.
Status Information
The status information displays the current state of the LiNX
system with status icons.
This notifies you that a drive lock-out
is active. A drive lock-out is a state
that prevents the wheelchair being
driven. See 5.18.3 Speed Reduction and
Seating Function Inhibits, page 71 for
more information about lock-outs and
slow-downs.
This notifies you that a drive slow-down
is active. A drive slow-down is a state
that prevents the wheelchair being
driven at maximum speed for safety
reasons. Instead, the wheelchair is
allowed to drive at a reduced speed
for the duration of the active drive
slow-down. See 5.18.3 Speed Reduction
and Seating Function Inhibits, page 71
for more information about lock-outs
and slow-downs.
This notifies you that a fault occurred.
The number indicates the type of fault.
See 7.1.1 Fault Codes and Diagnosis
Codes, page 117 for more information
about fault codes.
1637425-I
Advertisement
Table of Contents
