Table of Contents
Advertisement
Invacare® LiNX
Dip switch 3 & 4: Maximum cursor or mouse speed
B
disabled
2x base
Dip switch 5 & 6: Cursor delay
C
disabled
1.0 sec
Dip switch 7 & 8: Switch delay
D
disabled
0.5 sec
Dip switch 9 & 10: Latch delay
E
disabled
1.0 sec
110
4x base
8x base
2.0 sec
4.0 sec
1.0 sec
2.0 sec
2.0 sec
4.0 sec
Dip switch 11 & 12: Cursor movement options
F
3 switch
4 switch
G
OFF
ON
A This is a slower speed initially for precise targeting. It
is set and used in conjunction with Cursor Delay to
give the user the ability to move the mouse slowly at
first and then speed up after a set amount of time to
move across the screen efficiently.
B This setting controls the maximum speed of the cursor
and is the speed that the mouse will obtain after
the initial speed. Note: The base speed is set in the
control panel of the computer's mouse settings.
C This is the initial amount of time the switch must
be pressed and held before the mouse speeds up.
This setting is used in conjunction with Initial Mouse
Movement and Maximum Cursor settings.
D This setting controls the amount of time the directional
switches must be activated before the cursor will
move. This is to allow for inadvertent switch closures.
Note: This applies to directional switches only.
4 switch
5 switch
1637425-I
Advertisement
Table of Contents
