Invacare LiNX DLX-REM500 User Manual page 94

Table of Contents

Invacare® LiNX

Function Identifier

A function identifier is an optional audible cue that is

played directly after a navigation cue. It provides a count

by repeating the same note and it is useful, for example, to

identify functions of the same type within the same profile.

The function identifier can be set your provider. The number

of times this note repeats can be 1 to 6. This parameter

can also be set to None or Reverse. If set to None, no

function identifier cue is played after a navigation cue. If set

to Reverse, a single note is played with a longer duration

and higher frequency than the note used for the repeating

function identifier.

Function = Drive 1

Function = Drive 2

Function = Drive 3

Identifier = None

Fig. 5-142

Identifier = 1

Fig. 5-143

Identifier = 2

Fig. 5-144

Function = Drive 4

In this example four drive functions of the same profile

are shown. The function identifier are has been set for

each drive function with the following values: None, 1, 2

and Reverse.

Profile Index

Profile 1

Profile 2

Profile 3

Profile 4

Profile 5

Identifier = Reverse

Fig. 5-145

Profile Index

Fig. 5-146

Fig. 5-147

Fig. 5-148

Fig. 5-149

Fig. 5-150

1637425-I

Table of Contents