Status Display; Activate/De-Activate The Immobiliser - Invacare Shark II/SPJ+ User Manual

1.6

Status display

The status display serves to display error messages. For error codes see chapter "Error Codes
and Diagnostic Codes" on page 18.
1.7

Activate/de-activate the immobiliser

Activate the immobiliser
•
Whilst the remote is switched on, press and hold the ON/OFF
button (1) for 4 seconds. The remote will switch off immediately.
After 4 seconds the battery charging display will illuminate briefly
and the horn will be heard twice. The immobiliser is activated.
De-activate the immobiliser
•
Whilst the immobiliser is activated, switch on the remote using the
ON/OFF button (1). The diodes of the battery charging display will
illuminate briefly once from left to right. A slow countdown will then
be displayed from right to left.
• Press the horn button (2) twice before the countdown is completed.
You have about 10 seconds to do this. The immobiliser is de-
activated.
Activate
Deactivate
11