Voice Menu - Panasonic KX-TG2730S Operating Instructions Manual

Remote Operation with the Handset

Voice menu

If no commands are entered after you listened to new messages in the
mailbox and heard "End of final message", the handset will start the
following voice menu.
"Press 4 to play back new messages. Press 5 to play back all messages."
•You can enter direct commands even if the voice menu has started.
•You can switch to another mailbox by pressing (#) and the mailbox number
((1) to (3)) during the remote operation.
•The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.
•If a call is being received during the remote operation, you will hear incoming
call tones (p. 63). To answer the call, press
•If you hear "Memory full" after playback, erase some, or all, of the messages
(p. 73).
For Caller ID service users
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
Press the left soft key (
•The handset stops playback and automatically dials the phone number.
•If you need to edit the phone number to call back, press the right soft key
( ) until the desired edit pattern displays. The number will be edited to
EDIT
one of three patterns (p. 37). You can then call back the caller.
72
(p. 34)
) while the number is displayed.
DIAL
or
.
SMITH,JACK
1-234-567-8901
---Message 1----
I =Repeat
D I A L
H =Skip
E D I T