Re-Registering The Handset; Deregistration - Panasonic KX-TG2730S Operating Instructions Manual

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit
of the same model, you need to register it to that base unit. The handset will
be given a new extension number of that base unit. Only one handset can be
registered at a time. Make sure the base unit and the other handsets are
not being used. Registration must be completed within 1 minute.
If you have canceled the handset registration at the previous base unit
(p. 84), start from step 5.
Handset: Press
1
2 Scroll to "Initial setting" by pressing
or , and press
Ö Ñ
Scroll to "Registration" by pressing
3
or , and press
Ñ
4 Press at "HS registration".
á
5 Base unit:
Press
(MUTE).
•The MUTE indicator light flashes.
6 Handset:
#Press the right soft key (
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number
the top right of the display.
•You can stop registration by pressing (OFF) on the
handset and pressing (MUTE) on the base unit.
If you have not canceled the handset registration at the previous base unit
(p. 84), the handset number still remains on that base unit memory. To erase
the handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG2730S base unit: (1) press (PROGRAM), (2) press
(MUTE), (3) enter "335#", and (4) enter that handset number ((1) to (8)).
For assistance, please call: 1-800-211-PANA(7262)
(CONF/FUNCTION)
.
á
.
á
).
OK
"[1]" to "[8]"
is shown on
.
Copy directory
H
Initial setting
2Way radio mode
Ö
Set base unit
H
Registration
---------------
---------------
H
HS registration

Deregistration

Press MUTE on
base unit, then
OK on handset to
register handset
SP
Handset
ReRegistering
Ex. Extension number 2
SP
Handset [2]
RegRegistered
O K
[ ]
PRIVACY -
[ ]
PRIVACY 2
85