Remote Code; Remote Code; Set Mailbox2&3 - Panasonic KX-TG2730S Operating Instructions Manual

Remote Code

The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is "11". If you do not program your own
remote code, you can use "11".
Make sure the base unit and the handset are not being used.
1 Press
(CONF/FUNCTION)
2 Scroll to "Initial setting" by pressing
or , and press
Ö Ñ
3 Scroll to "Set answering" by pressing
or , press
Ñ
Scroll to "Remote code" by pressing
4
.
Ñ
Press .
5
á
•The current setting is displayed.
Enter a remote code using a 2-digit
6
number (00–99).
Press the right soft key (
7
•A beep sounds.
•If 3 beeps sound, the entered remote code is the same as the password
(p. 65). Start again from step 6 and select another code.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
To check the remote code
Repeat steps 1 to 5.
•The remote code is displayed. When finished, press (OFF).
For assistance, please call: 1-800-211-PANA(7262)
.
á
.
á
SAVE
H
Ö
H
or
Ö
H

Remote code

GF
Remote code
GF
).
Copy directory
Initial setting
2Way radio mode
Set tel line
Set answering
Set base unit
Recording time
Remote code
Set mailbox2&3
:11
S A V E
:35
S A V E
.
75