Installation; Connections - Panasonic KX-TG2730S Operating Instructions Manual

Installation

Connections

•USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z).
•The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
•To connect a standard telephone on the same line, see page 82.
•If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
For assistance, please call: 1-800-211-PANA(7262)
Raise the antennas.
Fasten the AC adaptor cord to
prevent it from being
disconnected.
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
Hook
11